Easy Wedge Plasterboard Splitter - Forklift Plasterboard Pack Separator

PRODUCT SPECIFICATION Step 01: COUNT

Count the number of plasterboards you require to split the pack into.

Step 02: PUSH

Push the Easy Wedge by hand into the slot between the boards, at the desired amount. Ensure the wedge is pushed in as far as possible so it does remain in position when your hands are removed.

Step 03: FORK

Get onto a forklift truck and with the forks angled at a horizontal position, navigate the end of one of the forks into the groove at the back end of the Easy Wedge. Ensure the fork on the forklift enters the groove straight and not at an angle as this may cause the fork to slip out and cause damage. With the fork at the correct angle in the groove continue driving forward, with the forks in the same position, until the wedge is slid in between the boards. Stop and reverse when there is approximately 25mm left of the Easy Wedge showing.

Step 04: LIFT

After reversing navigate the forks of the forklift either side of the Easy Wedge and slide them into the gap created. When the forks are in sufficiently lift, tilt and reverse out. Skids can then be placed down onto which the boards can be lowered onto.

FURTHER STYLES IN: Plasterboard Splitter - Forklift Plasterboard Pack Separator (0)

FURTHER TYPES AND FINISHES IN: Plasterboard Splitter     View All Plasterboard Splitter Range

RECOMMENDED ACCESSORIES (0)